chAIR -Manned multicopter Episode 21 Flying and Tuning Electric VTOL Axel Borg

chAIR -Manned multicopter Episode 21 Flying and Tuning  Electric VTOL Axel Borg

http://amazingdiyprojects.com Professional video fotage and interview (swedish this time -sorry): https://www.facebook.com/orebrokommun/videos/1598769980165428/ Setup: FC 5x KK 2.1 running stock 1.6 firmware Motors 76x Multistar Elite 5010 274Kv ESC 76x afro 20A HV, with one extra 63V 330uF low ESR capacitor fitted to each ESC to handle the long current path from battery to ESC. Batteries 80x Multistar 4S 5.2Ah RC 5x Turnigy TGY-i6S Digital Proportional Radio Control System All of the above purchased from Hobby King, -my favorite online hobby shop! Total cost approximately 10.000USD

chAIR -Manned multirotor Episode 22 -Second flight pilot view only Axel Borg

chAIR -Manned multirotor Episode 22 -Second flight pilot view only Axel Borg

http://amazingdiyprojects.com Professional video fotage and interview (swedish this time -sorry): https://www.facebook.com/orebrokommun/videos/1598769980165428/ This is the complete pilot view camera video from the second test flight during which I tried different FC settings to achieve better directional yaw stability. FC 5x KK 2.1 running stock 1.6 firmware Motors 76x Multistar Elite 5010 274Kv ESC 76x afro 20A HV, with one extra 63V 330uF low ESR capacitor fitted to each ESC to handle the long current path from battery to ESC. Batteries 80x Multistar 4S 5.2Ah RC 5x Turnigy TGY-i6S Digital Proportional Radio Control System All of the above purchased from Hobby King, -my favorite online hobby shop! Total cost approximately 10.000USD "Have you tried taking it out of ground effect to see how that effects the handling?" -Well, not long enough to actually get a feel for the out of ground effect characteristics, but long enough to discover that the sound from the propellers change quite drastically to the better, much less vibrating-bee sound to a smother whoosh sound from moving air. Its just that hovering at 4-5m rather than 2 is less safe.

chAIR -Manned quadcopter Episode 26 -Holiday flight Axel Borg

chAIR -Manned quadcopter Episode 26 -Holiday flight Axel Borg

I hope to have a infotainment type of "Build your own" e-book out till September/October on : http://amazingdiyprojects.com Today I tried out flying a little faster and more aggressively than previous flights. There were some significant gusts, but the multirotors small projected area makes it difficult for the gusts to really bite and push around the craft, so no major counteraction needed. 162kg TOW Hover efficiency 7.5-7.7g/W Setup: FC 5x KK 2.1 running stock 1.6 firmware Motors 76x Multistar Elite 5010 274Kv ESC 76x afro 20A HV, with one extra 63V 330uF low ESR capacitor fitted to each ESC to handle the long current path from battery to ESC. 76 17x5inch DJI-style propellers Batteries 80x Multistar 4S 5.2Ah RC 5x Turnigy TGY-i6S Digital Proportional Radio Control System All of the above, except the extra capacitors, purchased from Hobby King, -my favorite online hobby shop! Total cost approximately 10.000USD

chAIR -Manned multicopter Episode 25 Media day 2 electric aircraft Axel Borg

chAIR -Manned multicopter Episode 25 Media day 2  electric aircraft Axel Borg

http://amazingdiyprojects.com Im flying the longest distance yet, four large circuits on my test site. Mean wind 3-4m/s gust 10m/s which is noticeable but not a problem. The aft battery packs comes in 0.1V (20%) lower than the front packs. I will try moving my seat 30-50mm forward to compensate. Im pleased with the current PI-settings and stick scaling values for now. The camera people are just what you would expect; professionals creating content for whatever company they are working for. The lightness and stiffness of the seat and mount, styrofoam and a piece of fishing pole, make them vulnerable for picking up and transmitting vibrations. The first time I flew the multi I actually was surprised by the level of vibrations, not that they were remarkable, its just that I was kind of expecting super smoothness since I thought I did a good job balancing all the props. Im not flying higher since I do not believe in reincarnation. Setup: FC 5x KK 2.1 running stock 1.6 firmware Motors 76x Multistar Elite 5010 274Kv ESC 76x afro 20A HV, with one extra 63V 330uF low ESR capacitor fitted to each ESC to handle the long current path from battery to ESC. Batteries 80x Multistar 4S 5.2Ah RC 5x Turnigy TGY-i6S Digital Proportional Radio Control System All of the above purchased from Hobby King, -my favorite online hobby shop! Total cost approximately 10.000USD

Guy builds working hoverbike in garage

Guy builds working hoverbike in garage

This is my invention, the FlytCycle. It's a fully functional hover bike that was constructed in just 3 weeks. So far we've flown it hundreds of times and it's a ton of fun to fly around! We thought you'd enjoy seeing it in action! It's a VTOL personal flying aircraft that's essentially a manned drone. Of course it's a bit more complicated than that but operates on the same basic principles. You can see pictures and learn more about it on our website: www.FlytAero.com

Top Videos -  loading... Change country
Load 5 more videos
 
Nelze přehrát
00:00/00:00
  •  
  •  
  •  
  •  
  •  
  •  
  •  
ZAVŘÍT
ZAVŘÍT
ZAVŘÍT